AWI Standards

StandardsANSI/AWI 0620-2024 - Finish Carpentry/Installation

ANSI/AWI 0620-2024 - Finish Carpentry/Installation

3.2 Material

a)  shall confirm that all materials required for installation are available and properly conditioned to the jobsite per AWI 200 – Care & Storage (latest edition).

b) Furring and structural framing on wall/ceiling surface(s), shall be used as required and be in accordance with applicable codes and regulations.

3.3 Structural
3.1 General
Optimum Climate Controlled Relative Humidity table
Figure 2
Figure 3
Figure 4
Figure 66
Figure 67
Figure 65
3-3-4-1 Epoxy Resin
3-3-4-5 Solid Phenolic
tr-op-table
awi-fig5
ANSIAWI 0620-2018-awi-fig6
ANSIAWI 0620-2018-awi-fig7
awi-fig8
awi-fig9
awi-fig10
awi-fig11
awi-fig12
ANSIAWI 0620-2018-awi-fig13
ANSIAWI 0620-2018-awi-fig14
ANSIAWI 0620-2018-awi-fig23
ANSIAWI 0620-2018-awi-fig25
awi-fig30.ashx
ansi-awi-0620-2024-figure-41
awi-fig42
ANSIAWI 0620-2018-awi-fig43
awi-fig44
awi-fig45
awi-fig46
ANSIAWI 0620-2018-awi-fig51
ANSIAWI 0620-2018-awi-fig52
ANSIAWI 0620-2018-awi-fig53
ANSIAWI 0620-2018-awi-fig54
formula
awi-fig87
awi-fig5
awi-fig8
awi-fig9
awi-fig10
awi-fig15
awi-fig16
awi-fig17
ANSIAWI 0641-2019-awi-fig18
ANSIAWI 0641-2019-awi-fig19
ANSIAWI 0641-2019-awi-fig20
ANSIAWI 0641-2019-awi-fig21
ANSIAWI 0641-2019-awi-fig22
ANSIAWI 0641-2019-awi-fig23
ANSIAWI 0641-2019-awi-fig24
ANSIAWI 0641-2019-awi-fig25
ANSIAWI 0641-2019-awi-fig26
ANSIAWI 0641-2019-awi-fig27
ANSIAWI 0641-2019-awi-fig28
ANSIAWI 0641-2019-awi-fig29
awi-fig30
ANSIAWI 0641-2019-awi-fig31
ANSIAWI 0641-2019-awi-fig32
awi-fig33
awi-fig34
awi-fig35
ANSIAWI 0641-2019-awi-fig36
awi-fig41
awi-fig42
ANSIAWI 0641-2019-awi-fig43
awi-fig44
awi-fig45
awi-fig46
ANSIAWI 0641-2019-awi-fig72
ANSIAWI 0641-2019-awi-fig85
awi-fig86
awi-fig88
awi-fig89
awi-fig90
awi-fig91
awi-fig92
awi-fig93
awi-fig94
awi-fig95
awi-fig96
awi-fig97
awi-fig98
awi-fig99
awi-fig100
awi-fig102
ANSIAWI 1232-2022-awi-fig5
awi-fig8
awi-fig9
awi-fig10
ANSIAWI 12322022-awi-fig15
ANSIAWI 12322022-awi-fig16
ANSIAWI 1232-2022-awi-fig18
ANSIAWI 1232-2022-awi-fig19
ANSIAWI 1232-2022-awi-fig20
ANSIAWI 1232-2022-awi-fig22
ANSIAWI 1232-2022-awi-fig23
ANSIAWI 1232-2022-awi-fig24
ANSIAWI 1232-2022-awi-fig25
ANSIAWI 1232-2022-awi-fig26
ANSIAWI 1232-2022-awi-fig27
awi-fig28
ANSIAWI 1232-2022-awi-fig29
awi-fig30
ANSIAWI 1232-2022-awi-fig32
awi-fig33
awi-fig34
ANSIAWI 1232-2022-awi-fig35
awi-fig36
ANSIAWI 1232022-awi-fig41
awi-fig42
ANSIAWI 1232-2022-awi-fig43
awi-fig44
awi-fig45
awi-fig46
ANSIAWI 1232-2022-awi-fig72
awi-fig86
ANSIAWI 1232022-awi-fig103
ANSIAWI 1232022-awi-fig104
ANSIAWI 1236-2022-awi-fig5
awi-fig11
awi-fig12
ANSIAWI 1236-2022-awi-fig23
ANSIAWI 1236-2022-awi-fig24
ANSIAWI 1236-2022-awi-fig25
ANSIAWI 1236-2022-awi-fig43
ANSIAWI 1236-2022-awi-fig47
ANSIAWI 1236-2022-awi-fig48
awi-fig50
ANSIAWI 1236-2022-awi-fig110
ANSIAWI 1236-2022-awi-fig111
ANSIAWI 1236-2022-awi-fig112
Figure 5 - Compliance Testing Measurement
Figure 160 - Grain Angle
Figure 5 - Compliance Testing Measurement
Figure 23 - Overlap
Figure 24 - Chip-Out
Figure 25 - Over-Filing / Over-Machining
Figure 47 - Flushness, Countertop
Figure 52 - Flushness at Butted Edges
Figure 150 - Machining Through Veneered Panels
Figure 5 - Compliance Testing Measurement
Figure 8 - Scribe Filler
Figure 9 - Scribe Moulding
Figure 10 - Scribe Allowance
Figure 15 - Frameless Construction Reveal
Figure 16 - Face Frame Construction Reveal
Figure 17 - Laboratory Application Reveal
Figure 18 - Grain Layout, Stile and Rail 1
Figure 19 - Grain Layout, Stile and Rail 2
Figure 21 - Grain Layout, Flush Panel, Custom Grade
Figure 23 - Overlap
Figure 24 - Chip-Out
Figure 25 - Over-Filing / Over-Machining
Figure 26 - Flushness Variations, Exposed and Semi-Exposed
Figure 27 - Flushness, Fixed Horizontal
Figure 28 - Radius, Beveled, or Square Edges
Figure 29 - Radius and Square Edges
Figure 30 - Gaps and Flushness, Casework
Figure 32 - Glass Clips
Figure 33 - Wrap-Around Hinges, Flush Overlay
Figure 34 - Wrap-Around Hinges, Reveal Overlay
Figure 35 - Reveal, Hinge Overlay
Figure 36 - Adjustable Shelves
Figure 41 - Closure, Laminate
Figure 42 - Closure, Filler
Figure 43 - Gaps, Reveal Overlay Frameless
Figure 44 - Gaps, Flush Overlay Frameless
Figure 45 - Gaps, Reveal Overlay Face Frame
Figure 46 - Gaps, Inset Face Frame
Figure 72 - Drawer Gaps
Figure 85 - Soffit, Fascia, and Filler
Figure 86 - Casework Surfaces
Figure 87 - Maximum Allowable Adjustable Shelf Lengths for MOE Values
Figure 103 - Scribed Corner Closure Panel
Figure 104 - Scribed Inside Corner Filler
ansi-awi-0620-2024-figure-17